What's new in TransPost 4.2.1
Check this before you upgrade
Reference numbers are checked against MYOB's limits. If a number is longer than MYOB allows, TransPost stops that transaction and tells you which field to shorten, so every transaction keeps its own number. The limits are:
- 13 characters: invoice, purchase, receipt, payment or cheque, transfer and journal numbers, and activity slip IDs
- 15 characters: Card IDs
- 30 characters: item numbers and job numbers
This mostly affects imports from online stores and payment services, such as Shopify, Stripe or PayPal, which use long order or payment references. If yours do, map a shorter reference to the number field before upgrading. See Changes in behaviour for the other changes.
TransPost 4.2.1 is a reliability release for all editions: Standard, Plus, Premier and Express. We recommend it for all customers.
- It keeps your MYOB authorisation alive between imports. The TransPost Service now renews each company file's authorisation every 12 hours.
- It rides out short MYOB outages automatically, and stops cleanly in a long one.
- It makes duplicate checking more accurate, and the log shows which MYOB record a skipped row matched.
- It reads a wider range of files, and carries longer memos into MYOB.
Download 4.2.1
| Version | Released | |
|
|
TransPost 4.2.1 | November 2026 |
|
|
TransPost Express 4.2.1 | November 2026 |
|
|
TransPost Plus 4.2.1 | November 2026 |
|
|
TransPost Premier 4.2.1 | November 2026 |
Upgrading
- Back up your mappings: on the Mappings tab click Back Up All Mappings. See Mappings.
- Download the installer for your edition above and install it over your existing version. Your settings, mappings and authorisations are kept, and existing mappings behave as before unless you add the new fields.
- Open TransPost once and confirm your company file shows as connected.
- Standard, Plus and Premier: check the Start tab. If it says the TransPost Service isn't running, follow these steps to start it. Background renewal of your MYOB authorisation needs the Service running.
Coming from version 4.0 or earlier? Follow Upgrade to TransPost 4.2.1 instead, because each company file needs to be authorised once. Using Classic AccountRight or offline company files? TransPost 3.3.7 is the version for those.
Found something that doesn't behave as it did? Email support@transpost.com.au with the log file and, where relevant, an exported mapping and sample data file.
Changes in behaviour
Long reference numbers
TransPost checks each reference number against MYOB's limit. If a number is too long, TransPost stops that transaction and tells you which field to shorten, so two different transactions never share a number. The limits are:
- 13 characters: invoice, purchase, receipt, payment or cheque, transfer and journal numbers, and activity slip IDs
- 15 characters: Card IDs
- 30 characters: item numbers and job numbers
This mostly affects imports from online stores and payment services (for example Shopify, Stripe or PayPal), which use long order or payment references. If your file uses them, map a shorter reference to the number field before upgrading.
Longer memos and transfer numbers
- Line memos on Spend Money, Receive Money and Inventory Adjustments reach MYOB in full, up to 1000 characters. (Receive Money and Inventory Adjustments: Plus and Premier.)
- Transfer numbers reach MYOB in full, up to 13 characters. (Plus and Premier.)
- Re-importing an older file is safe. Transactions imported by an earlier version are still recognised, so they aren't posted again (for transfer mappings that update existing records, see Known issues). To delete a transfer that an earlier version imported, delete it in MYOB.
- Memos and descriptions built from several columns are checked as one value. If the result is too long, it is shortened and the log shows one warning.
- Other text that is too long is still shortened, and the log shows a warning when it is.
Dates before 1900
A date that reads as a year before 1900, such as 05/11/0026, stops its transaction with a clear message. Some systems write an empty date as 30/12/1899, which is treated the same way, so leave an empty date blank in your file.
Reading your files
- Stray quote marks inside a value, such as an inch mark in
Pipe 12" long, are read as part of the value. - Files saved by Excel as "CSV (Comma delimited)" keep curly apostrophes and accented letters.
- A quote in the middle of a value is read as ordinary text, as Excel does, so a line break after it starts a new row.
- New warnings tell you when a quote is never closed, and when a row has more values than the file has columns.
Stay connected to MYOB between imports
MYOB says an authorisation can lapse after 7 days without use. If you import less than weekly, you may have had to re-authorise before every import.
- Background renewal. The TransPost Service now renews each company file's authorisation every 12 hours, whether or not you import. (Standard, Plus and Premier. Express has no Service.)
- New File Setup option. Renew authorisation automatically lets you turn this off for a single file. It is on by default. (Not in Express.)
- Stale authorisations renew on link. Linking a file renews a stale authorisation for you, so there is no need to authorise again.
- Signing in again keeps your link. Authorising a file that is already linked keeps its link, and File Setup shows the file's status after every sign-in.
- Several company files. Each linked file stays linked when you link another.
- A failed sign-in keeps your authorisation. If MYOB doesn't complete a new authorisation, TransPost says so and asks you to try again, and your existing authorisation keeps working.
- Import errors keep the connection. An import error that has nothing to do with MYOB, such as a missing column in your file, leaves the company file connected.
- Clearer status. Expired files are shown as expired, and Link to Company File is highlighted when the file can't be used.
Important: background renewal needs the TransPost Service to be running. After a fresh install, check the Start tab. If it says the Service isn't running, follow these steps to start it.
Better handling of MYOB outages
- Automatic retries. If MYOB is briefly unavailable, TransPost waits and tries again.
- Safe resending. Before resending a transaction, TransPost checks whether MYOB already has it, and the log flags any row worth checking in MYOB. If it can't be sure, the row stays in the unprocessed file for you to check, so nothing is posted twice.
- A clean stop in a long outage. If MYOB stops responding, TransPost stops the run after three failures in a row, with one clear message and a note for any row worth checking in MYOB.
More accurate duplicate checking
When a row is skipped because it is already in MYOB, the log shows which MYOB record it matched.
- Spend Money: payments are matched on more than the cheque number, so a payment from another account or on another date is imported as its own payment.
- Receive Money: receipts are matched on amount and bank account as well as date and reference, so similar receipts are each handled correctly.
- Bank and card feeds (Spend Money): a new OneTransactionPerRow mapping field imports every row as its own payment, even when rows share a number and date. When TransPost combines rows into one payment, the log says so.
- Customer and supplier payments are checked against that customer's or supplier's existing payments in MYOB.
- Allowing duplicate numbers: new mapping fields let you import a transaction even when its number is already used:
- AllowDuplicatePaymentNo for Spend Money and Pay Bills
- AllowDuplicateReceiptNo for Receive Money and Customer Payments
- AllowDuplicateTransferNo for Transfer Money
- AllowDuplicateSlipID for activity slips
TransPost still refuses an exact copy.
Import improvements
- Log key column: if a mapping's Log key column isn't in the file, the import carries on.
- Item sales: the duplicate check is much faster on large company files.
- Units of measure on Service Sales: the UnitsOfMeasure field imports into MYOB.
- Freight on sales: a new sale with freight and no freight tax code on the row or the customer card imports the freight with your company's default freight tax code.
- Bill line defaults: a Description2 default is added to a bill's first line.
- MYOB Business files:
- Freight imports on sales, and a clear message explains a missing freight account.
- Default tax codes are applied to new customer and supplier cards.
- Customer and supplier imports take an ABN.
- TransPost uses the current MYOB product names and shows which MYOB product each file uses.
- Customer billing rate: offered only when the company file uses Time Billing.
Mapping Details
- Fields your company file doesn't offer: when a mapping maps fields that aren't available for the connected company file, Mapping Details shows a red link. It lists them so you can remove the ones you don't need. Fields TransPost no longer uses on any company file are marked as safe to remove.
- One warning: the log names all of a mapping's unavailable fields in a single warning.
- Mappings without an example file keep their Log key, and open without asking you to save.
Scheduled imports
- Run Schedule saves all your changes, including deleted steps, Skip ticks, folder and file mask changes, and renamed steps.
- Service warnings with help. The Start tab and Run Schedule warn when the Service isn't installed or running, with a How do I start it? link.
- Frequency default. A schedule with no frequency set runs every 2 hours, and the frequency must be at least a minute.
- After Run All Now, the Import tab shows your own file and mapping. (Not in Express.)
Other improvements
- Mapping editor: the Finish button is now labelled Save.
- Cancel and Stop Import keep your MYOB connection, so the next import starts faster.
- Premier Company Files: the status column reads Authorisation Status, with plainer statuses.
- Register and License windows: during a trial, the License window says no license number is needed. A license number that isn't accepted stays in the box so you can correct it.
- License and trial reminders appear earlier, and the renewal address is a clickable link.
- Error details: if TransPost hits an unexpected error, the details are saved to the log so our support team can help faster.
Import summaries and mapping backups
TransPost sends us summaries of your imports and backups of your mapping configuration. We use them to diagnose faults, back up your settings and improve the software. We do not collect the data you import or any values from it. See our privacy policy.
Known issues
- The TransPost Service isn't started on a fresh install. Start it using these steps.
- Service bills can't be imported into a MYOB Business company file yet.
- Dates: use day-first dates (
dd/mm/yyyy) oryyyy-mm-dd. A date in another format may be imported as today's date or read day-first, so check the log after importing. - A quote that is never closed: the row is imported with a warning. Check the log for it.
- A sale with no invoice number is posted again if you import the same file twice. Map an invoice number so a repeat import is recognised.
- Accented letters: if accented letters come through changed, for example
JoséasJosé, save the file as UTF-8 again and re-import. - Re-importing a file that 4.2.0 already imported can post some rows again if a memo or other compared field contains a curly apostrophe, en dash or accented letter. Check MYOB before re-importing such a file.
- Transfer Money mappings that update existing records may post a transfer again when you re-import a file that an earlier version imported. Check MYOB before re-importing.
- Premier, several company files: rarely, a file can show as needing authorisation for one check while another file's authorisation renews in the background. The next check clears it.